ETS-Lindgren HI-4460 Graphical Readout (Archived) - Manual (Page 32)

32 | Menus
PASS THRU
Used to pass data from the probe,
through the HI-4460 serial port, and
to a computer using appropriate
software, such as ProbeView™ LT.
When a probe is connected, select YES for pass thru in the CONFIG menu,
and then press the BACK/ENTER key twice to display the PASS THRU screen.
It will appear blank until you request information through your software. A
number value will be displayed.
This screen monitors the values from the probe as they are transferred to the
computer. To stop pass thru, select EXIT.
TEMP UNITS
Selects the temperature units of measurement. Valid choices are FARH for
Fahrenheit and CELS for Celsius.
DOWNLOAD CODE
Downloads updated HI-4460 software using a personal computer. You may use
either the serial connector or the fiber optic connector on the HI-4460. Select Yes
when the warning message displays to begin the download. See Download Utility
on page 57 for more information.
You will lose all data and setup information
when downloading updated software.
Archived 4/2/10