ETS-Lindgren HI-4460 Graphical Readout (Archived) - Manual (Page 16)

16 | Getting Started
Power Up
1. Press the power button on the
HI-4460.
The initial screen displays
NO PROBE , indicating a probe
is not connected, or the
connected probe is turned off.
2. Turn the probe on.
The screen indicates the
composite field level is being
sensed.
Default Settings
The HI-4460 is shipped in the default condition, with most settings turned off or
not enabled. Following are some of the default settings:
• Default probe— The HI-4422 Field Probe is set as the default probe.
To set up a different probe, select the desired probe in the
MAIN menu.
The HI-4460 may be set up with a probe attached.
• Axis— The default setting is XYZ. This allows data for each axis to be
displayed on the screen or in a log file.
Only some probes read from the X, Y, and Z axes. See the user
manual for your probe to determine if your probe reads three axes.
Archived 4/2/10