ETS-Lindgren HI-4460 Graphical Readout (Archived) - Manual (Page 35)

Menus | 35
AUDIO
Sets the speaker options.
• VOLUME—Use the up and down MODE key to select a volume level. A
tone is emitted as the volume is adjusted.
• ENABLE—Configures the audio option. The five choices are:
NONE: No audio options selected.
INTENSITY: This will emit a continuous beep relative to the field
strength. When enabled, the Cadence Enable is unavailable.
CADENCE: This will emit periodic beeps while a probe is attached.
When enabled, the Intensity Enable is unavailable.
ALARM: Generates periodic tones when an alarm condition exists.
LOG: This emits a beep each time the LOG key is pressed while in
single point logging, or periodically while logging with any other logging
setup.
Archived 4/2/10