ETS-Lindgren HI-4460 Graphical Readout (Archived) - Manual (Page 30)

30 | Menus
PROBE TYPE
Displays the name of the probe attached to the unit. If no probe is attached, you
may select one for setup purposes.
When using an HI-4433-GRE Field Probe or HI-4453 Field Probe the
unit will display a probe select menu. Select the correct probe
attached.
DISPLAY RATE
Selects the screen display rate from 1 to 6 updates per second.
AXIS ENABLE
Selects which information to include on the screen and in the log file. When XYZ
is selected, instantaneous values for each of the axes is displayed and/or logged.
When COMP is selected, only the composite of the axes is displayed and/or
logged.
STNDRD
Selects which standard to compare the reading to. See Standards on page 59 for
lists of available standards.
FREQUENCY UNITS
Selects the frequency range to be used, and displays only when a standard
comparison is selected. Possible frequency ranges are kHz, MHz, and GHz.
Some standards do not have frequencies associated with them, but use other
values. Those values, such as DAILY, are displayed here.
FREQUENCY
Used to enter the numerical part of the frequency desired. When the standard
comparison chosen does not have any frequency information associated with it,
this field will not be displayed. If a frequency which is not within the probe
specification is entered, the closest acceptable value will be entered upon exiting
the number picker function.
Archived 4/2/10