AVer EXR5016_series user manual - Manual (Page 92)

84
Name Function
(4) Playback Control
Buttons
Begin: Move at the beginning of the recorded video file.
Previous: Go back to the previous frame by frame.
Slower: Play the recorded video file at the speed of 1/2x, 1/4x, 1/8x, or 1/16x.
Rewind: Wind back the recorded video file.
Pause: Briefly stop playing the recorded video file.
Play: Play the recorded video file.
Faster: Play the recorded video file at the speed of 2x, 4x, 8x, or 16x
Next: Go to the next frame by frame.
End: Go to the end of the recorded video file.
(5) Archive To select the video file source for playing.
- DVR Recorded File (HD): To playback the recorded video from the hard disk which
was recording video on the DVR system. (see also Chapter 4.3.2 )
- Backup File(.dvr): The file is backup and save in *.dvr file format. (see also Chapter
4.3.3 )
- Backup File(.avf): The file is backup and save in *.avf file format. (EH/EXR series
doesn ’t support *.avf file format when backup).
(6) Status bar Display the recorded date, time and play speed.
(7) Camera ID Show the number of cameras that are being viewed. When you are in single screen
mode, click the camera ID number to switch and view other camera.
(8) Language To switch DVR application UI language.
(9) Advanced Advanced function is including :
HDD Backup: to call out HDD Backup application. (see also Chapter 4.3.4 )
iEnhance: to call out iEnhance application. ( see also Chapter 6 )
AVF to AVI: Convert the *avf file to *.avi file(EH/EXR series doesn ’t support this
function)
(10) Export Export includes Snapshot, Print, and Output Video Clip function.
Snapshot: Capture and save the screen shot either in *.jpg or *.bmp format.
Print: Print the screen shot.
Output Video Clip: Save the segmented file in *.avi, *.mpeg, or *.dvr format
(11) Segment Keep a portion of the recorded video (see also Chapter 4.3.1 )
(12) Full screen Use the entire area of the screen to only display the video. To return, press the right
button of the mouse or ESC on the keyboard.
When you switch to full screen in multiple-screen mode, Left click to toggle to only display
one of the video in the multiple-screen mode or all.
(13) Visual Search
Search from a specific camera by Date, Hour, Minute, 10 Seconds and Second(see also
Chapter 4.3.5 ).
(14) Find Next Search for the next event. You can use this when you are using Event Search function.
(15) Event Search
Search from the recorded activities that were recorded in event log (i.e., Sensor, Motion,
Video Loss). (see also
Chapter 4.3.6 )