AVer EXR5016_series user manual - Manual (Page 104)

96
6.1.1 To Setup Remote System Setting
The setting here applies to Remote DVR only.
6.1.1.1 System Setting
In the System Setting windows, click Update to accept the new settings, click Exit to exit without saving, and
click Default to revert back to original factory setting.
(1)
(2)
(3)
(4)
(5)
(1) Delete recorded data after
If you want the system to automatically erase the data after a certain days, enable the Delete recorded data
after check box and enter the numbers of days in Days text box.
(2) Delete event and alarm log after
If you want the system to automatically erase the event and alarm log files after a certain days, enable the Delete
event and alarm log after check box and enter the numbers of days in Days text box.
(3) Overwrite Enable
When there is not enough free space to record one hour data, the system automatically replaces the oldest data.
(4) Miscellaneous
Enable the conditions in Miscellaneous section you want the system to perform.
- Playback Mode
Select the mode of playback the video.
 Select date and time: Select the date and time which user wants to playback.
 Play the last file: Automatically playback the video from the last hour
 Instant Playback: Automatically playback the video which has just recorded
- Date Format
Select the date format which wants to display in Select date and time playback mode
- Auto Scan Period
Set the time gap of the Auto Scan function from 3 to 10 seconds. This automatically switches to the next
video in cycle depending on the set time gap.
(5) Login