Setting up the dvr unit, Installing the hard disks, 4 setting up the dvr unit – AVer EXR5016_series user manual User Manual
Page 24: 1 installing the hard disks
16
1.4
Setting Up the DVR Unit
1.4.1 Installing the Hard Disks
i
-
For hard disk spec, please referring t
→
→ AVerDiGi EH5108 series / EH5216 series/EH5108H series/EH5216H series or Pure
NVR → AVerDiGi EXR5016 series → Hardware Recommendations
-
The external USB hard disk only supports on file backup. Please do not use the external USB hard disk for
recording purpose.
EXR5008 Lite and EXR5016 Lite MUST purchase 90W adaptor to support the power supply for 3
rd
and 4
th
hard disk.
The “compatible hard disks” indicated in the above recommendation list only means that these commercially
available hard disks were tested with AVerMedia
®
products and functioned well under normal operation
conditions. AVerMedia
®
does not guarantee or provide warranties, explicitly, implied or statutory with respect
to the reliability of the hard disk function or its compatibility. In no event AVerMedia
®
shall be liable for
damages, with respect to any business interruption of clients, lost profits, loss of programs or other data on
your information handling system or otherwise. This includes direct, indirect, incidental, special, or
consequential damages, resulting from the incompatibility caused by the usage of these hard disks, even if
AVerMedia
®
has expressly advised about the risk of such damages. The entire risk arising out of the use of
any information attached here with is borne by the recipient.
User can install up to 4 SATA hard disks inside the DVR unit if it is necessary.
Follow the illustrated instructions below to install the hard disk:
1. Loosen all screws
2. Push the cover backward and lift
3. Loosen the screws of holder in order to take out the hard
disk rack.
4. Loosen all the screws of hard disk plate.