AVer EXR5016_series user manual - Manual (Page 110)

102
- Port
The port for connection
- User ID
Enter the user id that for connecting authority
- Password
Enter the password that is for connecting authority
- Channel
Select the channel of connected camera
6.1.1.3 Record Setting
In the Recording setup windows, click OK to accept the new settings, click Exit to exit without saving, and click
Default to revert back to original factory setting.
Record Setting of IP Camera
i
EH5108/EH5108H/EXR5008 series only has 8 channels will be available.
(1)
(2)
(3)
(1) Camera Icons
Select the camera number you want to set the recording setting. To select all the cameras, enable the ALL check
box. To select more than one camera, Right click on the camera icon. To select one camera only, Left click on
the camera icon. The camera icon turns red when it is selected.
(2) Recording Mode
The horizontal blocks from 00 to 23 represent the time in
24-hour clock and the vertical block 1 to 7 represent the
day in the week block (Sunday to Saturday). To record in
full 24 hours and 7 days a week, select the recording mode
and click the  button. If you want to only record at a
particular time or day, click Schedule button and select the
Recording Mode , and then click on the time or day blocks.
When the system starts recording a red triangle mark would