AVer EXR5016_series user manual - Manual (Page 166)

158
(6) Enable Deinterlace
Enhance the video quality. Set the Enable Deinterlace mode to #1, if you are capturing motionless picture and
select #2, if it captures lots of movement.
Remote DVR Camera Setting
Select the camera to modify settings. In the Camera Setting windows, click Update to save and apply the new
settings, click Exit to exit without saving.
i
EH5108/EH5108H/EXR5008 series only has 8 channels will be available.
(1)
(2)
(3)
(4)
(5)
(1) Camera Icons
Select the camera number you want to view. To enable/disable all cameras, click ALL check box.
(2) Enable
Set to enable/disable the selected camera. When there is no video source on the camera, we suggest disabling
it so that the system won’t detect it as video loss error.
(3) Input
Select the camera type as Remote DVR. For IP camera setting, see IP Camera Setting . To modify analog
camera setting, see Analog Camera Setting .
(4) Camera
- Display
Enable/disable to show the video. Even if the video of the selected camera is hidden you can still record
the video and preview it in playback mode.
- Enable Audio
Enable/disable audio of the camera.
- Name
Change the camera name
i
DVR supports Chinese characters but only can be entered in remote site (remote setup).