AVer EXR5016_series user manual - Manual (Page 120)

112
6.2 Familiarizing the Buttons in WebViewer PTZ
(1)
(2)
(3)
(4)
(6)
(5)
Name Function
(1) Direction buttons Adjust and position the focal point of the PTZ camera. Click the center to pan automatically.
(2) Zoom +/- Zoom in and out the image.
(3) Select PTZ Choose to enable/disable the PTZ camera. In the Select PTZ dialog box, Select column, click
to enable/disable viewing and controlling the PTZ camera.
Click OK to exit and save the setting and Cancel to exit without saving the setting.
(4) Focus +/- Adjust the focus manually to produce clear image.
(5) AutoPan Groups Operate the PTZ cameras automatically based on the selected camera group preset position
number.
(6) Camera preset
position number
Move the PTZ camera to the preset point. The reset point (1~9) is based on the user has setup
by remote control at local site.