AVer EXR5016_series user manual - Manual (Page 102)

94
6.1 Familiarizing the Buttons in WebViewer
Right-clicking on the WebViewer video screen, enables you to start video recording, change video quality, switch
camera and enable/disable DirectDraw.
i
EH5108/EH5108H/EXR5008 series only has 8 channels will be available.
(1)
(2) (3) (4) (5) (6) (7)
(8)
(9)
(11)
(10)
(1 2)
(13)
(14)
Name Function
(1) DirectDraw Enhance the video quality.
i
Not all graphic cards can support this function. If you cannot see the screen display correctly or screen is
messed, please check with VGA card vendor.
(2) Received file size Indicate the size of the data being sent per second.
(3) Camera frames Indicate the number of frames per second.
(4) One screen view To view single camera view on screen. User can right click on the screen to switch to
different camera view.
(5) Split screen view To view all cameras on screen simultaneously.
(6) Audio Enable/disable remote sound.
(7) Record Start to record the video of the selected camera in AVI format. Directly click screen to select
the channel that user wants to record and press Record button.
(8) Remote Console Initiate Remote Console. It allows you to control DVR server (see also Chapter 6.3 ).
(9) Event Log Viewer Display the Event logs, Operation logs, System logs, and Network logs.
(10) Remote setup Change the DVR server settings (see also Chapter 6.1.1 )
(11) PTZ Control Initiate PTZ camera controller(see also Chapter 6.2 )
(12) Snapshot Capture and save the screen shot in *.bmp format.
(13) Full screen Use the entire area of the screen to only display the video.
To return, Right click the mouse or press ESC on the keyboard.