Canon MR-14EX User Manual

Page 78

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Attaching the Flash Heads

Attaching the MP-E 65mm f/2.8 1-5x’s Dedicated Hood

Attach the dedicated hood to the

MP-E 65mm f/2.8 1-5x’s fiiter

screw mount.

• The dedicated hood is optional.

Attach the mount ring to the

macro flash mount on the front of

the lens.

• Make sure it is securely attached.
• Attach the flash heads to the flash

head mounts.

If the MP-E 65mm f/2.8 1-5x’s dedicated hood is attached to a different EF

macro lens, flash obstruction may occur.

Attaching the EF 100mm f/2.8 MACRO USM’s Dedicated Hood ET-67

With the EF 100mm f/2.8 MACRO

USM lens, you can also attach the ET-

67 (Optional) hood to the bayonet

mount on the front of the mount ring.

However, since the hood will

obstruct part of the flash coverage,

turn off the MT-24EX's main switch

and use the existing light instead.