Fe lock, Select a shooting mode with the camera, Focus the subject – Canon MR-14EX User Manual
Page 30
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
FE Lock
With Type-A cameras, you can set FE (flash exposure) lock. This is the
flash version of AE lock. With FE lock, you use spot metering to obtain the
correct flash exposure reading for a specific area of the subject.
* The flash mode must be set to ETTL.
1
Select a shooting mode with the
camera.
Focus the subject.
Aim the viewfinder’s spot
metering circle over the area of
the subject to be metered. Then
press the
button on the
camera. FE lock remains in effect
for 16 sec.
►
The MR-14EX fires a preflash to
obtain an exposure reading. The
reading is retained temporarily in
memory.
►
FEL is displayed on the viewfinder
bottom for 0.5 sec.
• You can obtain a new FE lock
reading by pressing the < FEL > button
again.
• To cancel FE lock, wait until 16 sec.
elapse or press the
or <[!]> button on the camera.
Focus the subject.
30