Flash mode, Press the button, Setting the film speed – Canon MR-14EX User Manual

Page 19: Lcd panel illumination, Press the <-^-> button to illuminate the lcd panel, И ^ 2 )

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Flash Mode

Press the button to select the E-TTL (or TTL) autoflash mode or
manual flash mode.

ETTL

Press the

button.

► Pressing the button toggles the flash

mode between ETTL (TTL) and M

ETTL ( TTL 1

M-

0 With a Type-A camera,

ettl

autoflash will be set. With a Type-B camera,

ttl

autoflash will be set.

Setting the Film Speed

The film speed is set automatically according to the film speed set with the camera.

LCD Panel Illumination

In low-light, you can illuminate the LCD panel for (è12 ).

Press the

<-^->

button to

illuminate the LCD panel.

► The LCD panel Is illuminated for 12

sec.

• To turn off the illumination, press the

<-A->

button again.

• Pressing any button other than the

and <'A'> buttons will extend

the Illumination time beyond

( и ^ 2 ) .