Pilot lamp and test firing, Check the pilot lamp, Press the pilot lamp (test firing button) – Canon MR-14EX User Manual

Page 16: Flash exposure confirmation

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Pilot Lamp and Test Firing

This tests whether the Macro Ring Lite can fire a flash.

Check the Pilot lamp.

• When the flash is ready, the Pilot

lamp will light.

Press the Pilot lamp (test firing
button).

► A flash will fire.

• The Pilot lamp is also a test firing

button.

Q • A test flash cannot be fired after you press the camera's shutter button halfway

and the camera metering is still active for (56 ).

• If the Macro Ring Lite is in the SE mode, pressing the test firing button turns on

the Macro Ring Lite.

Flash Exposure Confirmation

When a correct flash exposure has

been obtained, the flash exposure

confirmation lamp lights in yellow-

green for 3 sec. immediately after the

flash fires.