Second-curtain synchronization, Set the shooting mode with the camera, Focus and take the picture – Canon MR-14EX User Manual

Page 62

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Second-Curtain Synchronization

Normally, the flash fires in synchronization with the first shutter curtain when

the shutter is fully open. With second-curtain synchronization, the flash fires

immediately before the second shutter curtain closes at the end of the

exposure.

Set the shooting mode with the
camera.

Press the < + > and <—> buttons

simultaneously to select on
the LCD panel.

► Each time you press the < -f- > and

<—> buttons simultaneously, the
synchronization mode changes in the

following loop:

------ -----------

-------- (OFF).---------

Focus and take the picture.

► Check that the 4 icon Is displayed in

the viewfinder before taking the

picture.

►To cancel second-curtain synchronization, press the < -l-> and <--> buttons

simultaneously to turn off the icon on the LCD panel.

► Second-curtain synchronization does not work with the camera’s Q (Full Auto)

shooting mode and Programmed image Control modes. ,