Second-curtain synchronization, Set the shooting mode with the camera, Focus and take the picture – Canon MR-14EX User Manual

Page 40: W» second-curtain synchronization

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Second-Curtain Synchronization

Normally, the flash fires in synchronization with the first shutter curtain when

the shutter is fully open. With second-curtain synchronization, the flash fires

immediately before the second shutter curtain closes at the end of the

exposure.

Set the shooting mode with the
camera.

Press the < -i- > and <—> buttons

simultaneously to select on
the LCD panel.

► Each time you press the < + > and

<—> buttons simultaneously, the
synchronization mode changes in the

following loop:

— ► a — —

-------- (OFF).---------

Focus and take the picture.

► Check that the 4 icon is displayed in

the viewfinder before taking the

picture.

To cancel second-curtain synchronization, press the < + > and <—> buttons

simultaneously to turn off the icon on the LCD panel.

•With the

Rebel G/50QN,

TTL aUtoflash is used with second-curtain

synchronization.

•Second-curtain synchronization does not work with the camera’s O (Full Auto)

shooting mode and Programmed Image Control modes.