Press the button, Focus the subject, Take the picture – Canon MR-14EX User Manual

Page 59: Repeat steps 4 to 5 to take the, Remaining two bracketed shots

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

FEB (Flash Exposure Bracketing)

Press the

sei

7SET>

button.

► The MR-14EX’s LCD panel display

will be as shown on the left

5.5

Focus the subject.

► When you press the shutter button

halfway, the icon is displayed on

the viewfinder’s bottom.

Take the picture.

• Check that the 4 and icons are

displayed In the viewfinder before
taking the picture.

Repeat steps 4 to 5 to take the
remaining two bracketed shots.

• After all three bracketed shots are

taken, the FEB setting is cancelled

automatically.

FEB cannot be used with any flash exposure compensation set with the camera.

• Before taking the picture, make sure that the MR-14EX’s pilot lamp is lit or the

4 icon is displayed In the viewfinder. The □ (single-frame) film advance mode

Is recommended.

• If the flash is not ready, you can still take pictures in the normal AE mode.

When the flash is ready, you can resume taking the bracketed flash shots.

feb

and flash exposure compensation can be set together with the MR-14EX.

In this case, the FEB amount will shift according to the flash exposure

compensation amount.

C.Fn-1 can prevent the FEB setting from canceling automatically after the

three bracketed flash shots are taken, (^p.64)

C.Fn-2 can change the sequence of the bracketed flash shots, (^p.64)