Press the button and select a : b, Focus and take the picture, Firing both flash tubes – Canon MR-14EX User Manual

Page 27

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Selecting the Flash Tube

Firing Both Flash Tubes

Press the button and

select

►

Each time you press the button, the

selection will change in the following

loop:

I—^(OFF)—► GESiB] A : B —I

I---- ^A : B c^---------------------- 1

►

The flash ratio and the and di:-

icons will be displayed.

Press the <

> or <

> button to

move the bar

left or right to set

the respective A:B flash ratio.

• You can set the flash ratio from 1:8 to

1:1 to 8:1

Focus and take the picture.

• Check that the J icon (flash ready) is

displayed in the viewfinder before

taking the picture.

0 • The flash ratio for the short bars

8:1

•

4:1

•

2:1

•

1:1

•

I on the flash ratio scale Is as shown below.

1:2

1:4

1:8

(5.6:1) (2.8:1) (1.4:1) (1:1.4) (1:2.8) (1:5.6)

• In exposure stops, the flash ratio range is equivalent to 3:1 to 1:1 to 1:3.
• Even if the

icon is not displayed, both flash tubes will fire. The flash

output will be the same for both flash tubes.

• You can also use the < SEUSET > button and < + ><—•> buttons to set the

flash ratio for flash tubes A and B.