Modeling flash, Press the depth-of-field preview button – Canon MR-14EX User Manual

Page 29

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Modeling Flash

Firing a modeling flash enables you to check the lighting and shadow

effects before you take the picture.

* The modeling flash is fired at 70 Hz for 1 sec.

Modeling Flash with Fiash Ratio (w/EOS-1D, 1V, 3, D30, ELAN

7/7E, or 30/33)

Press the depth-of-field preview
button.

► The modeling flash will fire according ^

to the flash ratio that has been set. ■

o To prevent overheating and deterioration of the flash tubes, do not fire the

modeling flash more than 10 times in succession. After 10 times, allow the MR-

14EX to cool for at least 10 minutes.

C.Fn-6 can disable the modeling flash with flash ratio, (^p.64)

C.Fn-4 can have the modeling flash fire at a uniform output with all Type-A
cameras, (^p.64)