Unum – Canon MR-14EX User Manual

Page 47

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Using the Wireless Flash System

Features Available with Wireless Flash

The following features can also be used in a wireless flash system:

■ Wireless FE Lock
■ Wireless flash exposure compensation
■ Wireless flash exposure bracketing (FEB)
■ Wireless high-speed sync (FP flash)

• To set the above features, see pages 30 to 37.
• You set all the above features with the master unit. You need not touch the

slave unit’s controls.

Wireless Manual Flash

With all Type-A cameras, you can also set up a wireless manual flash
system.

Setting the flash output for flash tubes A and B and slave C

With GHiB A : B : c displayed on the master unit, set the flash output for
flash tubes A and B. Then set the flash output for slave C. For the setting

procedure, see “Firing Both Flash Tubes at a Different Output” on page 39.

0 To determine the correct flash exposure, use a hand-held flash meter or take

test shots.

With all Type-A cameras, C.Fn-5 can set the same flash output for flash
tubes A and B and slave C. (-^p.64)
• While

unum

is not displayed on the master unit, you can just set the flash

output with the master unit.