Radio, Auto, Manual – Sony MHC-3500 User Manual
Page 32: Tuning in automatically, 1 press tuner, 3 press auto/manual, 4 tune in to the station with tuning + or, Tuning in manually, 2 select band by pressing band, Indicator on the display
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Radio
1
BAÑO
MUTING
AUTO
N I
/■
n n n
1
M
/ M
u LJ • LJ MHz
AUTO/
MANUAL
&
TUNING
The automatic tuning allows you to receive
stations whose signal is strong enough.
When the signal is too weak, use the
manual tuning.
Tuning in Automatically
1
Press TUNER.
2
Press BAND repeatedly until the
desired band appears.
As you press BAND, the band changes
as follows: FM MW -> LW
t___________
I
3
Press AUTO/MANUAL.
Make sure that AUTO appears in the
display.
4
Tune In to the station with TUNING
+ or-.
5
For receiving FM stations with the
stereo effect, press STEREO/MUTING
so that MUTING appears.
Tuning in Manually
1
Press TUNER.
2
Select band by pressing BAND.
3
Press AUTO/MANUAL so that AUTO
disappears from the display.
4
Tune in to the station with TUNING
+ or-.
Indicator on the display
TUNED: Appears when a station of
sufficient signal strength is tuned in.
STEREO: Appears when an FM stereo
program of sufficient signal strength is
received.
When an FM stereo program is
noisy or hard to receive
Press STEREO/MUTING so that MUTING
disappears from the display.
There will be no stereo effect, but the
reception will be improved. Press again to
restore the stereo effect.
Antenna adjustment Q
For MW and LW reception, find the best
location for the AM loop antenna.
32