Tomei Powered ARMS M8260 - Manual (Page 29)

7-3 Installing the Front Turbocharger.
① With reference to ①~② install the rear side
in the same way.
② Install the bracket.
③ Connect the Oil Return Hose.
④ Connect the Oil Inlet Hose.
⑤ Connect the Front Water Line Inlet Hose
to the rear side of the Turbo (Ref: 5-1).
※ Use the Heatproof Hose to cover the
Water Line Hose. (Part Number ⑧-7)
⑥ Install the Exhaust Manifold Cover and
ground cable.
⑦ Connect the Front Water Outlet Hose.
⑧ Install bolt C & D.
⑨ Install the Water Connector.
⑩ Install Hose B.
⑪ Connect the Water Outlet Hose to the
Water Connector.
⑫ Install Tube A, then install Tube A & B
with the Flare Nut
Bolt
Bracket
Bolt
Exhaust Manifold Cover
Bolt
Ground Cord
29
with the Flare Nut.
⑬ Install the Eyebolt with the Copper Washer
(Part Number ⑧-9). 【T=41N・m (4.2kgm)】
⑭ Cut the appropriate length of Vacuum Hose
(Part Number ⑧-8) needed, then install.
Bolt
Bolt
29