Tomei Powered ARMS M8260 - Manual (Page 26)

5. INSTALLING THE NEW PARTS TO THE REAR TURBOCHARGER.
5-1 Installing the Oil Return Pipe & Water Line Outlet Hose.
※ After converting the 4-2 to 5-1
procedure to the rear, lock the
front turbo & the rear turbo banjo
bolt in place.
5-2 Installing the Water Line Inlet Hose & Oil Inlet Hose.
REAR OIL RETURN
* Oil Return Gasket (Part Number ⑦-4)
* Rear Oil Return Pipe (Part Number ⑦-2)
* Bolt x2 (Part Number ⑦-3) [T=9N・m (0.9kgm)]
FRONT WATER INLET
* Copper Washer x2 (Part Number ②‐2)
* Banjo Bolt (Part Number ②‐1)
[T=31.4N・m (3.2kgm)]
REAR OIL INLET
⑥
Installation is completed at
chapter 3-1
Lock in place
Installation is completed
at chapter 4-2.
26
REAR OIL INLET
* Copper Washer x2 (Part Number ⑥-2)
* Banjo (Part Number ⑥-3)
* Banjo Bolt (Part Number ⑥-1)
[T=31.4N・m (3.2kgm)]
* Elbow (Part Number ⑥-4)
* Hose (Part Number ⑥-5)
Installation is completed at
chapter 3-1.
REAR WATER INLET
* Copper Washer x2 (Part Number ③-2)
* Banjo (Part Number ③-3)
* Banjo Bolt (Part Number ③-1)
[T=31.4N・m (3.2kgm)]
* Hose (Part Number ③-4)
Installation is completed at chapter 3-2.
26