Rally Armor 2012-14 Impreza (4d/5d) User Manual
Imf 22

IMF 22
Version 1.1 Release Date 08.05.2012
1
2012+ SUBARU IMPREZA HATCH/SEDAN MUD FLAP INSTALLATION INSTRUCTIONS
PLEASE REVIEW THESE INSTRUCTIONS IN ITS ENTIRETY BEFORE ATTEMPTING INSTALLATION
For high resolution color images of these instructions, please visit
To protect your Rally Armor mud flaps, care must be taken during parking and reversing. Rally Armor always recommends professional installation.
Check wheel clearances after installation, especially on vehicles outfitted with non-OEM offset wheels and suspensions. Adjust accordingly.
Rally Armor is not responsible for damage or loss of installed mud flaps.
Each mud flap set contains 4 flaps and mounting hardware (unless otherwise noted).
Recommended tools: Offset or ratcheting screwdriver, short Phillips screwdriver, small & long flat head screwdrivers.
YOUR 2012+ IMPREZA MOUNTING HARDWARE CONSISTS OF:
HOW TO REMOVE STOCK FASTENERS:
Quantity
Hardware Item
Item ID
2
Front brackets
HMF22-FR-BR
2
Rear Brackets
HMF14/16-R-BR
2
Side Skirt Front Spacers
SSK-SP
10
Round Edge Clips
RoCl
6
Polygon Clips
PolCl
2
Plastic Inserts
Ins3
14
Long Stainless Steel Screws
1.5SS
2
Short Stainless Steel Screws
1SS
16
Washers
SmWash
2
Spacers
.5SP
2
Front Screw Tip Covers
Scrwcvr
Cautionary Tip: The hardware is strong and self threading but over-tightening the
clips is not advised.
Installation Tip: To ease installation and avoid damage to existing OEM clips during
removal, a well lit, climate controlled installation environment is recommended.
To the installer: Please return these instructions to the customer
after installation. Always test and check wheel clearances before
returning vehicle.
To the customer: Retain these instructions after installation. They
may be necessary for installing other optional parts or removal of
this accessory.