Rally Armor 2013+ Ford Focus User Manual
Rally Armor For bicycles

IMF 27
Version 1.1 Release Date 05.12.2013
1
2013+ FORD FOCUS ST MUD FLAP INSTALLATION INSTRUCTIONS
PLEASE REVIEW THESE INSTRUCTIONS IN ITS ENTIRETY BEFORE ATTEMPTING INSTALLATION
For high resolution color images of these instructions, please visit
To protect your Rally Armor mud flaps, care must be taken during parking and reversing. Rally Armor always recommends professional installation.
Check wheel clearances after installation, especially on vehicles outfitted with non-OEM offset wheels and suspensions. Adjust accordingly.
Rally Armor is not responsible for damage or loss of installed mud flaps.
Each mud flap set contains 4 flaps, mounting hardware and brackets (unless otherwise noted).
Recommended tools: Philips Screwdriver, Torx Screwdriver, small & long flat head screwdrivers. Jack/Jack stands for rear installation.
YOUR MOUNTING HARDWARE CONSISTS OF:
Quantity
Hardware Item
Item ID
2
Front brackets
HMF27-BR-FR
2
Rear Brackets
HMF27-BR-RE
6
Long Spacers
1 Sp
6
Short Spacers
.5sp
14
Round Edge Clips
RolCl
2
Short Stainless Steel Screws
1SS
6
Medium Stainless Steel Screws
1.5SS
6
Long Stainless Steel Screws
3SS
14
Washers
SmWash
2
“Wide” Inserts
Ins3
2
“Flat” Inserts
Ins5
INSERT GUIDE
SCREW GUIDE
HOW TO REMOVE STOCK FASTENERS
Cautionary Tip: The hardware is strong and self threading but over-tightening the mounting clips is not advised.
Installation Tip: To ease installation and avoid damage to existing OEM clips during removal, a well lit, climate controlled installation environment is recommended.
To the installer: Please return these instructions to the customer after installation. Always test and check wheel clearances before returning vehicle.
To the customer: Retain these instructions after installation. They may be necessary for installing other optional parts or removal of this accessory.