beautypg.com

Rally Armor 2013+ BRZ/FRS User Manual

Imf 23

background image

IMF 23

Version 1.0 Release Date 07.17.2012

1

2013+ SUBARU BRZ/ TOYOTA FR-S MUD FLAP INSTALLATION INSTRUCTIONS

PLEASE REVIEW THESE INSTRUCTIONS IN ITS ENTIRETY BEFORE ATTEMPTING INSTALLATION

For high resolution color images of these instructions, please visit

http://www.rallyarmor.com

To protect your Rally Armor mud flaps, care must be taken during parking and reversing. Rally Armor always recommends

professional installation. Check wheel clearances after installation, especially on vehicles outfitted with non-OEM offset wheels and

suspensions. Adjust accordingly. Rally Armor is not responsible for damage or loss of installed mud flaps.

Each mud flap set contains 4 flaps and mounting brackets and hardware (unless otherwise noted).
Recommended tools: Offset/ratcheting Phillips, small & long flat head screwdrivers.

YOUR 2013+ SUBARU BRZ /TOYOTA FRS MOUNTING HARDWARE CONSISTS OF:

HOW TO REMOVE STOCK FASTENERS:

Quantity

Hardware Item

Item ID

2

Front brackets

HMF23-FR-BR

2

Rear Brackets

HMF23-R-BR

14

Polygon Clips

PolCl

10

Long Stainless Steel Screws

1.5SS

4

Short Stainless Steel Screws

1SS

14

Washers

SmWash

Cautionary Tip: The hardware is strong and self threading but over-tightening the
mounting clips is not advised.
Installation Tip: To ease installation and avoid damage to existing OEM clips during
removal, a well lit, climate controlled installation environment is recommended.

To the installer: Please return these instructions to the customer
after installation. Always test and check wheel clearances before
returning vehicle.
To the customer: Retain these instructions after installation. They
may be necessary for installing other optional parts or removal of
this accessory.