Rally Armor 98 to 02 Subaru Forester User Manual
Rally Armor For bicycles

IMF13
Version 1.1 Release Date 3.25.2010
1
To protect your Rally Armor mud flap set, care must be taken during parking and reversing. Check wheel clearance after installation, especially vehicles outfitted
with non‐OEM offset wheels and suspensions. Rally Armor is not responsible for damage or loss of installed flaps.
Each mud flap set contains 4 flaps for all 4 tires of the vehicle.
Recommended tools: Offset, ratcheting or stubby Phillips screwdriver, small flat head screwdriver, rust penetrating spray, razor blade (optional)
REQUIRED OEM PARTS FOR INSTALLATION:
Rally Armor SF 1998‐2002 Subaru Forester mud flap mounting hardware consists of:
Quanti
ty
Hardware Item
Item ID
8
Polygon Edge Clips
PolCl
4
Round Edge “S” Clips
RoCl
4
Small Washers
SmWash
12
Large Washers
Wash
2
Short Screws
.75SS
2
Medium Screws
1SS
8
Long Screws
1.5SS
2
Rear Mounting
Brackets
HMF13‐BRKT
To remove stock fasteners
Screw Size Reference
Cautionary Tips:
On older SF Foresters, it is recommended that all existing OEM hardware be generously sprayed with anti rust / liquid penetrating spray to ease removal.
The supplied hardware is strong and self threading but over‐tightening the clips is not advised.
Installation Tip: To ease installation and avoid damage to existing OEM clips during removal, a well lit, climate controlled installation environment is recommended.
To the installer: Please return these instructions to the customer after installation. Always test and check wheel clearance before returning vehicle.
To the customer: Retain these instructions after installation. They may be necessary for installing other optional parts or removal of this accessory.