Rally Armor 2015+ Subaru STI and WRX Sedan - Manual

IMF32
IMF 32
Version 1.0
1
2015+ SUBARU IMPREZA WRX & STI SEDAN MUD FLAP INSTALLATION INSTRUCTIONS
For high resolution color images of these instructions, please visit http://www.rallyarmor.com
Check wheel clearance after installation, especially vehicles outfitted with non-OEM wheels and suspensions.
To protect your Rally Armor mud flap set, care must be taken during parking and reversing.
Rally Armor is not responsible for damage or loss of installed flaps.
YOUR MOUNTING HARDWARE CONSISTS OF: GUIDE TO CLIPS PROVIDED: HOW TO REMOVE STOCK FASTENERS:
Quantity Hardware Item Item ID
4 Flat “U” Clips UClip
4 “S” Clips SClip
12 Small Washers SmWash
4 Lock Nuts SSLnut
6 Short Screws 1SS
2 Long Screws 1.5SS
2 Inserts Ins3
2 Front Mounting Brackets HMF32-FR-BR
2 Rear Mounting Brackets HMF32-RE-BR
2 Front Spacers HMF32-SP
Recommended tools: Offset, ratcheting or stubby Phillips screwdriver, small flat head screwdriver, 7/16 ” wrench.
Cautionary Tip: The hardware is strong and self-threading but over-tightening the clips is not advised.
Installation Tip: To ease installation and avoid damage to existing OEM clips during removal, a well-lit, climate
controlled installation environment is recommended.
Parking and Reversing: Any extended mud flap application can be damaged or dislodged should they get caught in
between a tire and a curb or object. To protect your Rally Armor mud flap set, care must be taken during parking and
reversing.
Rally Armor is not responsible for damage or loss of installed flaps.
To the customer: Retain these
instructions after installation. They may
be necessary for installing other optional
parts or removal of this accessory.
To the installer: Please return these
instructions to the customer after
installation. Always test and adjust wheel
clearance before returning vehicle.