Rally Armor 12-14 Hyundai Veloster - Manual

IMF 24
IMF 24
Version 1.0 Release Date 12.22.2012
1
2012+ HYUNDAI VELOSTER (NON‐TURBO & TURBO) MUD FLAP INSTALLATION INSTRUCTIONS
PLEASE REVIEW THESE INSTRUCTIONS IN ITS ENTIRETY BEFORE ATTEMPTING INSTALLATION
For high resolution color images of these instructions, please visit http://www.rallyarmor.com
To protect your Rally Armor mud flaps, care must be taken during parking and reversing. Rally Armor always recommends
professional installation. Check wheel clearances after installation, especially on vehicles outfitted with non‐OEM offset wheels and
suspensions. Adjust accordingly. Rally Armor is not responsible for damage or loss of installed mud flaps.
Each mud flap set contains 4 flaps and mounting brackets and hardware (unless otherwise noted).
Recommended tools: Offset/ratcheting Phillips, small & long flat head screwdrivers.
Tire removal not necessary to complete installation.
YOUR 2012+ HYUNDAI VELOSTER MOUNTING HARDWARE CONSISTS OF: HOW TO REMOVE STOCK FASTENERS:
Quantity Hardware Item Item ID
2 Front brackets HMF24‐BR‐FR
2 Rear Brackets HMF24‐BR‐RE
2 Front Side Skirt Spacers HMF24‐SP
4 Polygon Clips PolCl
4 Stainless Steel Screws 1SS
2 Stainless Steel Lock Nuts SSLnut
18 Washers SmWash
Cautionary Tip: The hardware is strong and self threading but over‐tightening the
mounting clips is not advised.
Installation Tip: To ease installation and avoid damage to existing OEM clips during
removal, a well lit, climate controlled installation environment is recommended.
To the installer: Please return these instructions to the customer
after installation. Always test and check wheel clearances before
returning vehicle.
To the customer: Retain these instructions after installation. They
may be necessary for installing other optional parts or removal of
this accessory.