Rally Armor 11-14 Subaru WRX Hatchback User Manual
Rally Armor For bicycles

IMF15
Version 1.0 Release Date 1.4.2010
1
To protect your Rally Armor mud flap set, care must be taken during parking and reversing. Check wheel clearance after installation, especially vehicles outfitted
with non‐OEM offset wheels and suspensions. Rally Armor is not responsible for damage or loss of installed flaps.
Each mud flap set contains 4 flaps for all four tires of the vehicle.
Recommended tools: Offset or ratcheting screwdriver, stubby Phillips screwdriver, small flat head screwdriver, 7/16” wrench. Optional: small mallet
2008+ STI Version 2 mounting hardware consists of:
Quantity
Hardware Item
Item ID
10
Polygon Edge Clips
PolCl
6
Small Washers
SmWash
6
Large Washers
Wash
4
Lock Nuts
SSLnut
8
Short Screws
1SS
4
Flathead Screws
15FHSS
2
Inserts
Ins
2
Front Mounting Brackets
HMF15‐BR‐DF/ HMF15‐BR‐PF
2
Rear Mounting Brackets
HMF15‐BR‐DR/ HMF15‐BR‐PR
To remove stock fasteners
Cautionary Tip: The hardware is strong and self threading
but over‐tightening the clips is not advised.
Installation Tip: To ease installation and avoid damage to
existing OEM clips during removal, a well lit, climate
controlled installation environment is recommended.
To the installer: Please return these instructions to the
customer after installation. Always test and check wheel
clearance before returning vehicle.
To the customer: Retain these instructions after installation.
They may be necessary for installing other optional parts or
removal of this accessory.