Rally Armor 11-14 Subaru WRX & STI Sedan - Manual

IMF19 Version 1.3 Release Date 10.22.2010
1
To protect your Rally Armor mud flap set, care must be taken during parking and reversing. Check wheel clearance after installation,
especially on vehicles outfitted with non‐OEM offset wheels and suspensions. Adjust to accommodate accordingly in these
scenarios. Rally Armor is not responsible for damage or loss of installed flaps.
Each mud flap set contains 4 flaps for all four tires of the vehicle.
Recommended tools: Offset or ratcheting screwdriver, stubby Phillips screwdriver, small & long flat head screwdriver, 7/16” wrench.
YOUR 2011 STI & WRX SEDAN HARDWARE CONSISTS OF: GUIDE TO INSERTS PROVIDED: HOW TO REMOVE STOCK FASTENERS:
Quantity Hardware Item Item ID
6 Polygon Edge Clips PolCl
12 Small Washers SmWash
8 Lock Nuts SSLnut
4 Short Screws 1SS
4 Flathead Screws 15FHSS
2 Inserts Ins
2 Inserts ‐with plastic screw Scw Ins
2 Front Mounting Brackets HMF19‐F‐BR
2 Rear Mounting Brackets HMF19‐R‐BR
Cautionary Tip: The hardware is strong and self
threading but over‐tightening the clips is not advised.
Installation Tip: To ease installation and avoid damage
to existing OEM clips during removal, a well lit, climate
controlled installation environment is recommended.
To the installer: Please return these instructions to the customer after installation. Always test
and check wheel clearance before returning vehicle.
To the customer: Retain these instructions after installation. They may be necessary for
installing other optional parts or removal of this accessory.