Dell PowerVault NX3500 User Manual
Page 44
44
About Your Solution
TPM
configuration
operation
honored. System
will now reset.
A TPM configuration
command has been entered.
The system will reboot and
execute the command.
Information only.
TPM
configuration
operation is
pending. Press
(I) to Ignore OR
(M) to Modify to
allow this change
and reset the
system.
WARNING:
Modifying could
prevent
security.
This message displays during
system restart after a TPM
configuration command has
been entered. User
interaction is required to
proceed.
Enter I or M to proceed.
TPM failure.
A Trusted Platform Module
(TPM) function has failed.
Unable to launch
System Services
image. System
halted!
System halted after F10
keystroke because System
Services image is either
corrupted in the system
firmware or has been lost due
to system board replacement.
The iDRAC6 Enterprise card
flash memory or BMC SPI
flash may be corrupted.
Restart the system and
update the Unified Server
Configurator repository to
the latest software to restore
full functionality. See the
Unified Server
Configuration user
documentation for
more information.
Restore the flash memory
using the latest version on
support.dell.com. See the
iDRAC 6 User Guide for
instructions on performing a
field replacement of the
flash memory.
Table 1-4. System Messages
(continued)
Message
Causes
Corrective Actions
book.book Page 44 Monday, January 24, 2011 12:24 PM