Dell PowerVault NX3500 - Manual (Page 61)

Installing System Components 61
Figure 2-7. Replacing an Expansion NIC Card
6 Unpack the new NIC card and prepare it for installation.
For instructions, see the documentation accompanying the card.
7 Holding the expansion NIC card by its edges, position the card so that the
card-edge connector aligns with the expansion-card connector on the
expansion-card riser. See Figure 2-7.
8 Insert the card-edge connector firmly into the expansion-card connector
until the card is fully seated.
9 Replace the expansion-card latch. See Figure 2-7.
10 Connect any cables to the expansion NIC card.
1 expansion-card latch 2 expansion NIC card
3 filler bracket 4 expansion-card riser
2
1
4
3
book.book Page 61 Monday, January 24, 2011 12:24 PM