Replacing the fan – Dell Latitude E4200 (Late 2008) User Manual
Page 25
Replacing the Fan
1.
Hold the fan with the cable on the right side, and align the screw holes in the fan with the screw holes in the base assembly.
2.
Reconnect the fan connector to the system board.
3.
Replace the two M2 x 3-mm screws to secure the fan to the base assembly.
4.
Replace the palm rest assembly (
Replacing the Palm Rest Assembly
).
5.
Replace the coin-cell battery (see
Replacing the Coin-Cell Battery
).
6.
Replace the display assembly (see
Replacing the Display Assembly
).
7.
Replace the module with Bluetooth wireless technology (see
Replacing the Card With Bluetooth Wireless Technology
).
8.
Replace the keyboard (see
Replacing the Keyboard
).
9.
Replace the LED cover (see
Replacing the LED Cover
).
10.
Replace the solid state drive (see
Replacing the Solid State Drive and Cable Assembly
).
11.
Replace the memory module (see
Replacing the Memory Module
).
12.
Replace the WLAN and WWAN cards (see
Replacing the WLAN/WiMax Card
and
Replacing a WWAN Card
).
13.
Replace the service panel (see
Replacing the Service Panel
).
14.
Follow the procedures in
After Working on Your Computer
.
Back to Contents Page
CAUTION:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance.