Hostname – Dell PowerVault DR2000v User Manual
Page 133
Replication Enabled : No
Replication Compression Enabled : Yes
Replication Encryption : AES 128-bit
replication --limit --speed < hostname> Description Limits the bandwidth used during replication by defining a bandwidth limit using any of the following settings: • Kilobytes/second (kbps) • Megabytes/second (mbps) • Gigabytes/second (gbps) • Unlimited bandwidth (this is the default setting); minimum allowed bandwidth setting is 192 kbps Configures replication limits for a DR Series system. Syntax replication --limit --speed 10gbps --target acme-60 Result Successfully updated replication limit for acme-60 to 10 Gbps. Changing traffic control policies ... done. replication --resync --name Description Resynchronizes the replication process between a source and target container in a replication relationship on a DR Syntax replication --resync --name dataStorage3 --role source Result Successfully initiated replication resync on container dataStorage3. replication --troubleshoot --peer Description Troubleshoots the replication connections between a source and target container on a DR Series system. Syntax replication --troubleshoot --peer 10.25.19.5 Result The following examples shows both successful and unsuccessful replication connection attempts: Testing connection to port 9911... Connected! Testing connection to port 9915... Connected! 133
Series system. This command should only be used in an emergency situation with the help of Dell Support. Do not
mistake this command as an ability to start a replication sync outside of the schedule window. If your intention is to start
a replication outside of the window, you can either delete the schedule, or add a temporary replication window to the
current schedule and delete it when the systems are in sync.
Testing connection to port 9904... Connected!