Network – Dell PowerVault DR2000v User Manual
Page 35

[--login_group
authenticate --set --user
authenticate --guestmode [--enable]
[--disable]
authenticate --server_signing --mode
authenticate --help
authenticate
--show Displays current ADS domain, authorized local CIFS users, and
login group.
--join Joins an ADS domain.
--leave Leaves an ADS domain.
--update Updates ADS configuration.
--add Creates local workgroup user for CIFS authentication or adds
login group.
--delete Deletes local workgroup user from CIFS authentication or
deletes login group.
--set Sets password for a local workgroup user.
--guestmode Configures all CIFS shares for guest only access.
--server_signing Configures server signing for CIFS.
For command-specific help, please type authenticate --help
For example:
authenticate --help show
Network
The DR Series system CLI commands let you perform the following network-related tasks:
•
Displays information about a DR Series system.
•
Deletes network interfaces.
•
Restarts networking.
•
Configures bond interface to use DHCP.
•
Assigns a static IP address to the bond interface.
•
Creates bond interfaces for the system.
•
Creates eth interfaces for the system.
•
Adds an interface to an existing bond.
•
Configures servers in the domain name system (DNS).
•
Updates the bonding mode or maximum transmission unit (MTU).
•
Updates bonding and individual interface information.
•
Resets networking to factory configuration.
•
Manages local hosts.
•
Manages local routes.
•
Looks up the IP address or hostname for a specific destination.
•
Starts a packet trace route for a specific network host.
•
Pings a destination host
•
Blinks LED on the specific ethernet device.
•
Starts the specific ethernet devices on restart.
35