Dell PowerVault DR2000v - Manual (Page 62)

Syntax
rda --delete_client --name
--name Host name
For example, to delete the client TEST-W2K8–02, run the command: rda --delete_client --name TEST-
W2K8-02
Result
Rapid Data Access (RDA) client TEST-W2K8-02 deleted successfully.
rda --update_client --name --mode
Description
The command updates the attributes of a Rapid Data Access (RDA) client. The RDA client modes are auto, passthrough,
and dedupe. If a RDA client has four or more CPU cores, it is considered to be dedupe-capable. However, the RDA client
operating mode depends upon how it is configured in the DR Series system. For details, see
ost --update_client --name
--mode .
Syntax
rda --update_client --name --mode
dedupe>
--name Hostname of client
--mode RDA modes (auto, dedupe, passthrough)
For example, to update the client mode as passthrough for the BabuK-W2K8-02 client, run the command: rda --
update_client --name BabuK-W2K8-02 --mode passthrough
Result
Rapid Data Access (RDA) client BabuK-W2K8-02 with mode Pass-through added
successfully.
rda --limit --speed < | default> --target
Description
The command limits the bandwidth consumed by RDA when replicating over a WAN link.
Syntax
rda --limit --speed < | default> --target
hostname>
--speed RDA speed limit (eg. 10mbps).
--target DR replication target name or IP
address.
For example, to limit the speed of testbackup to 4gbps, run the command: rda --limit --speed 4gbps --
target testbackup
62