Network --tcpdump [--pkt_size <128 - 32768, Network --tcpdump [--file_size <0 - 100 – Dell PowerVault DR2000v User Manual
Page 49

Syntax
network --troubleshoot --show_active cifs
Result
tcp 0 0 10.25.19.10:45 10.25.20.82:52596
ESTABLISHED
tcp 0 0 10.25.19.10:45 10.250.201.68:60163 ESTABLISHED
tcp 0 0 10.25.19.10:45 10.250.208.235:29587 ESTABLISHED
tcp 0 0 10.25.19.10:45 10.250.209.210:13828 ESTABLISHED
network --tcpdump [--port
32768>] [--file_size <0 - 100>] [--stop] [--host ethN>] Intercepts TCP/IP packets being transmitted or received over the network to which the DR Series system is attached. • --port by its type: NFS, CIFS, replication, OST, or RDS port • --pkt_size by the packet size you specify • --file_size by the file size you specify • --host by the IP address (or addresses) that you specify • --interface by the interface that you specify The tcpdump files are collected on the DR Series system (in /store/tcpdump/), and they can be a valuable resource of network --tcpdump [--pkt_size <128 - 32768>] Description Collects TCP/IP packet information based on a specific packet size (for example, 256 Kilobytes or KB). NOTE: To stop the tcpdump process, use the DR Series system CLI network --tcpdump --stop command. Syntax network --tcpdump --pkt_size 256 Result Successfully started tcpdump, please use "network --tcpdump --stop" to stop. For more information, see network --tcpdump [--port file_size <0 - 100>] [--stop] [--host . network --tcpdump [--file_size <0 - 100>] Description Collects TCP/IP packet information based on a specific file size that you can configure (such as 3 Megabytes or MB). NOTE: To stop the tcpdump process, use the DR Series system CLI network --tcpdump --stop command. 49
You can filter the packets being collected by using the following options to the DR Series system CLI network --tcpdump
command:
information about how your system and network interact. To stop collecting tcpdump files, use the DR Series system CLI
network --tcpdump --stop command.