Dell PowerVault DR2000v - Manual (Page 147)

stats --datacheck
This set of DR Series system CLI commands allow you to display the current Data Check statistics gathered by the
system, reset the Data Check statistics for the system, and display the statistic-based Data Check help-related options.
For more information, see
Stats --Datacheck Command Usage .
stats --datacheck Command Usage
This topic introduces the stats --datacheck command usage:
• stats --datacheck
• stats --reset --datacheck
• stats --help datacheck
NOTE: If you specify a command without supplying the expected value or option, you will be prompted to provide
the correct value or option.
stats --datacheck
Description
Displays the current set of datacheck statistics on a DR Series system.
NOTE: The Progress field in the statistics can indicate one of three values: Waiting, Running, and Idle.
• Waiting: Data Check is in this state because another operation is now running.
• Running: Data Check is in this state when running the scans.
• Idle: Data Check is in this state waiting for the next opportunity to run the Data Check scans.
The following example shows the status of active DR Series system operations in response to the stats --datacheck
command on a DR Series system when Data Check is enabled.
Syntax
stats --datacheck
Result
Data Check : Enabled -
namespace,blockmap,throttle:75%
Progress : Idle
Active Writes : No
Active System Operations : No
Total Detected Errors : 0
Last Complete Namespace Scan : 2012-02-02 17:48:18
Last Complete Blockmap Scan : 2012-02-02 16:33:08
Namespace Scans Completed : 183
Namespace Scan Entries : 6
Namespace Scan Errors : 0
Namespace Scan Start Time : 2012-02-02 17:43:08
Namespace Scan Progress : 100.00%
Blockmap Scans Completed : 8
Blockmap Scan Entries : 3
Blockmap Scan Errors : 0
Blockmap Scan Start Time : 2012-02-02 16:33:06
Blockmap Scan Progress : 100.00%
147