Authenticate commands, Authenticate command usage – Dell PowerVault DR2000v User Manual
Page 28

[--comments
[--appliance_alerts
[--software_updates
[--daily_report
alerts --test_email
alerts --snmp_add --host
--port
--community
alerts --snmp_delete --host
alerts --snmp_enable --host
alerts --snmp_disable --host
alerts --snmp_trap_email [--enable][--disable]
alerts --help
alerts
--show Displays system alerts and events.
--test_email Sends a test email using current email settings.
--snmp_add Sets SNMP traps to be sent to a host.
--snmp_delete Stops sending SNMP traps to a host.
--snmp_enable Enables SNMP traps for a host.
--snmp_disable Disables SNMP traps for a host.
--snmp_trap_email Enables/Disables SNMP traps to be sent out as an email.
For command-specific help, please type alerts --help
For example:
alerts --help show
Authenticate Commands
This topic introduces the set of DR Series system CLI commands that let you configure the DR Series system so it can
authenticate with the Microsoft Windows Active Directory Services (ADS).
For information about specific authenticate commands, see
.
Authenticate Command Usage
This topic introduces the authenticate command usage:
•
authenticate --show [options]
•
authenticate --join [options]
•
authenticate --leave [options]
•
authenticate --update --kerberos
•
authenticate --add [options]
•
authenticate --delete [options]
•
authenticate --set --user
•
authenticate --guestmode [options]
•
authenticate --server_signing --mode
•
authenticate --help
28