Dell PowerVault DR2000v - Manual (Page 96)

interface ]
[--update] [--type ] [--interface
eth(0-N)|lo>]
[--delete] [--type ]
system --replication_traffic [--add] [--interface ]
[--update] [--interface ]
[--delete]
system --opdup_traffic [--add] [--incoming_interface ]
[--outgoing_interface ]
[--update] [--incoming_interface ] [--
outgoing_interface ]
[--delete]
system --help
system
can be one of:
--show Displays command specific information.
--reboot Reboots the machine.
--shutdown Shuts down the machine.
--upgrade Upgrades the software on the machine.
--license Installs the license on the machine.
--setname Sets the name of the machine.
--setcompression Sets the compression type to use on the
stored data.
--setdate Sets the date and time zone for the
machine.
--setntp Uses network time protocol (NTP) source
to update time.
--setlogin Updates the login password.
--telnet Enables or disables telnet access.
--datacheck Enables or disables online data
verification features.
--marker Enables or disables markers.
--add_storage Adds an expansion shelf.
--storage Locates a disk or expansion shelf.
--mgmt_traffic Configure Webserver or Telnet to use a
specific network interface.
--backup_traffic Specify network interfaces to use for
backup network traffic.
--replication_traffic Set default network interface for
replicating 'source' data.
--opdup_traffic Set default network interfaces for
optimized copy data transfer.
For command-specific help, please type system --help
eg:
system --help show
User
This topic introduces the DR Series system CLI commands that allow you to manage service and root accounts by
having the ability to enable or disable these types of “user” accounts, and provide the capability to display the list of
current active user accounts logged in to a DR Series system:
• user --show [--users] [--logins]
• user --enable --user
96