System --storage [--set_usage_alert <70% - 90 – Dell PowerVault DR2000v User Manual
Page 92
system --storage [--set_usage_alert <70% - 90%>]
Description
Used to specify at what storage utilization percentage an alert should be sent.
Syntax
system --storage --set_usage_alert 90
Result
System storage usage alert has been set at 90%.
system --storage [--blink] [--type
disk
Description
Turns on an LED that is used in locating a specific physical disk or data storage expansion shelf (using the system --
storage command) in the DR Series system. Select from the following DR Series system CLI command options:
•
--blink: turns on LED on the physical disk or expansion shelf to identify it.
•
--type
•
--service_tag
•
--disk
NOTE: There is a counterpart to this command, in which you can turn off the LED that aids in locating the physical
disk or expansion shelf. For more information, see
system --storage [--unblink] [--type
.
NOTE: The above options are only available on a Physical DR.
Syntax
system --storage --blink --type external --service_tag HCM0PT3
Result
Turned on blinking for all disks in enclosure "HCM0PT3".
system --storage [--unblink] [--type
disk
Description
Turns off an LED that is used in locating a specific physical disk or data storage expansion shelf (using the system --
storage command) in the DR Series system. Select from the following DR Series system CLI command options:
•
--unblink: turns off LED on the physical disk or expansion shelf.
•
--type
•
--service_tag
•
--disk
NOTE: The above options are only available on a Physical DR.
Syntax
system --storage --unblink --type external --service_tag CTKHVW3
92