Dell PowerVault DR2000v - Manual (Page 38)

network --restart
Description
Restarts the current networking configuration for a DR Series system.
Syntax
network --restart
Result
Shutting down interface eth0: [ OK ]
Shutting down interface eth1: [ OK ]
Shutting down interface eth2: [ OK ]
Shutting down interface eth3: [ OK ]
Shutting down loopback interface: [ OK ]
Bringing up loopback interface: [ OK ]
Bringing up interface bond0:
Determining IP information for bond0... done. [ OK ]
DNS Updated hostname: acme11.storage.local
network --setdhcp
Description
Configures the DR Server system to use the dynamic host configuration protocol (DHCP) form of IP addressing. (The
options bondif and nwif are only available on a Physical DR.)
Syntax
network --setdhcp [--bondif ] [--nwif ]
--bondif Bond interface to create (dhcp).
--nwif Eth interface to create (dhcp).
Result
Bond device operation successful. Please run 'network --restart' for the
changes to take affect.
network --setstatic_ip [--bondif ] [--nwif ] --ip
already in use> --netmask [--gateway ]
Description
Configures the DR Series system to use a static IP address and configures the corresponding netmask (and/or the
routing gateway for a DR Series system). The options bondif and nwif are only available on a Physical DR.
Syntax
network --setstatic_ip --ip 10.20.20.20 --netmask 255.255.222.0 --gateway
10.25.20.10
--bondif Bond interface to create (static).
--nwif Eth interface to create (static).
--ip Static IP address to use.
--netmask Netmask for the static IP address.
--gateway Gateway for routing ('bond0' only).
38