Maintenance --hardware [--reinit_nvram, Maintenance --hardware [--restore_hw_db – Dell PowerVault DR2000v User Manual
Page 113

maintenance --configuration [--reset_web_certificate]
Description
The current release supports installation of an SSL certificate. This command can be used to restore the default SSL
certificate that ships with the DR.
Syntax
maintenance --configuration --reset_web_certificate
Result
Successfully restored the default certificate.
maintenance --hardware [--reinit_nvram]
Non-volatile RAM (NVRAM) is the type of memory that retains its contents even when power to it is turned off. This is an
important component of the DR Series system that is crucial to normal data operations
Description
Initializes the NVRAM that resides on the Dell DR Series system hardware appliance on which the DR Series system
software is installed.
CAUTION: Carefully consider before attempting to use the DR Series system CLI --reinit_nvram command. This
command should only be used under the direction of Dell Support because it permanently erases all data stored
on the NVRAM in the Dell DR Series system hardware appliance. This command is only to be used when replacing
the NVRAM in your hardware appliance. Contact Dell Support and seek assistance before you use this command.
Syntax
maintenance --hardware --reinit_nvram
Result
Please enter administrator password:
WARNING: ALL NVRAM DATA WILL BE ERASED!
Do you want to continue (yes/no)?
Type yes to continue or no to return to the system prompt.
maintenance --hardware [--restore_hw_db]
Description
Restores and repairs the Hardware Health Monitor database for a DR Series system.
Syntax
maintenance --hardware --restore_hw_db
Result
WARNING: All previous Event & Alert information will be deleted.
Do you want to continue? (yes/no) [n]? y
Please enter the administrator password:
The Hardware Health Monitor has been successfully restored.
113