Dell PowerVault 51F (8P Fibre Channel Switch) - Manual (Page 91)

support.dell.com PowerVault 51F Commands 4-29
Certain restrictions apply to the length and format of the switch name. Specifically,
the name of the switch:
•
May not exceed 19 characters in length.
•
May not contain characters other than a-z, A-Z, 0-9 or _ (the underscore charac-
ter), the first character excepted.
•
Must have the first character be among a-z or A-Z.
NOTE: It is suggested that switch names be unique in a cascaded environment.
switchShow
The following example shows the switchShow command screen, which prints
switch and port status. The fields are described in Table 4-16.
switch:admin> switchShow
switchName: open146
switchType: 3.1
switchState: Online
switchRole: Principal
switchDomain: 1
switchId: fffc41
switchWwn: 10:00:00:60:69:00:04:64
port 0: sw Online FL-Port 1 private, 1 phantom
port 1: -- No_Module G-Port
port 2: sw No_Light G-Port
port 3: sw Online FL-Port 1 private, 1 phantom
port 4: -- No_Module
port 5: sw Online E-Port 10:00:00:60:69:00:00:12 "sw1" (upstrea
port 6: sw No_Light
port 7: sw No_Light
port 8: sw No_Light
port 9: sw Online E-Port 10:00:00:60:69:00:01:b4 "sw3" (downstr
port 10: sw No_Light
port 11: sw No_Light
port 12: sw No_Light
port 13: sw No_Light
port 14: sw No_Light
port 15: sw No_Light