Removing the doors from the rack, Removing the doors from the rack -5, Figure 1-2 – Dell PowerVault 51F (8P Fibre Channel Switch) User Manual
Page 33: Rack kit contents -5
support.dell.com
Installing the Dell PowerVault 51F Switch
1-5
Figure 1-2. Rack Kit Contents
Removing the Doors From the Rack
You must remove the front and back doors from the rack to provide access to the
interior of the rack and to prevent damage to the doors while installing the kit. Use
the following procedure to remove the doors.
CAUTION: To prevent personal injury due to the size and weight of the
doors, never attempt to remove the doors by yourself.
1.
Open the latch on the front door (see Figure 1-3).
Slide the latch’s push-button cover up as far as it will go, press the push button,
rotate the handle clockwise until the latch releases, and then pull the door open.
outer slides
manifold
cable-management arm with
brackets
washer (8)
10-32 x 1/2-inch screw (8)