Dell PowerVault 51F (8P Fibre Channel Switch) User Manual
Page 142
A-4
Installation and Troubleshooting Guide
HLO
INVHLO (1)
The path selec-
tion task has
received a
HELLO message
with an invalid
parameter from a
neighbor switch.
Check that all paths and
routing tables are correct. If
they are not, reboot the
neighbor switch.
Check the paths and routes
again. If they are still incor-
rect, reboot the local switch.
LSDB
LSID (2)
A Link State
Record received
as part of a Link
State Update has
an out of range
domain ID.
Check that all paths are cor-
rect. If any path is missing
to any switch in any part of
the fabric, reboot the switch
with the missing path.
MCAST
ADDBRANCH (2)
A branch is being
added to a broad-
cast or multicast
tree, but the
parameters are
incorrect.
If this is caused by a config-
uration command, check the
parameter values. Other-
wise, check the broadcast
tree with the bcastShow
command. If the tree is
incorrect, reboot the local
switch.
ADDPORT (3)
A multicast
routing table pro-
gramming failed.
Run the portLogShow
command. Contact Cus-
tomer Support.
NOPARENT (2)
An error occurred
while computing
a broadcast or
multicast tree.
Run the LSDbAllShow
command. Contact Cus-
tomer Support.
NOPARENTLSR (2)
An error occurred
while computing
a broadcast or
multicast tree.
Run the LSDbAllShow
command. Contact Cus-
tomer Support.
REMPORT (3)
Removing an
entry from a mul-
ticast routing
table failed.
Run the portLogShow
command. Contact Cus-
tomer Support.
SPFCOST (3)
An error occurred
with computing
the multicast
path tree.
Run the LSDbAllShow
command. Contact Cus-
tomer Support.
Table A-1. Errors (continued)
Module
Error
Severity
Explanation
Action