Integrated storage controller card, Removing the integrated storage controller card – Dell DX6000G User Manual
Page 92
92
Installing System Components
Integrated Storage Controller Card
Your system includes a dedicated expansion-card slot on the riser for an
integrated SAS controller card that provides the integrated storage subsystem
for your system’s internal hard drives. The controller supports SAS and SATA
hard drives and also enables you to set up the hard drives in RAID
configurations as supported by the version of the storage controller included
with your system.
Removing the Integrated Storage Controller Card
CAUTION:
Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that came with the
product.
1 Turn off the system, including any attached peripherals, and disconnect
the system from the electrical outlet.
2 Open the system. See "Opening the System" on page 80.
3 If installed, remove the expansion card. See "Removing an Expansion
4 To remove the storage controller card, pull the blue release lever to free the
card from the connector on the expansion-card riser.
5 Lift the card out of the connector.
book.book Page 92 Wednesday, December 22, 2010 2:13 PM