Dell POWEREDGE M915 - Manual (Page 223)

Installing Blade Components 223
SD Card
PowerEdge M905 and M805
In these blades, the SD card is an unmanaged persistent storage card.
A hypervisor may be installed using this card.
1 Remove the blade. See "Removing a Blade" on page 155.
2 Install the SD card in the lower card slot. See Figure 3-26.
3 Install the blade. See "Installing a Blade" on page 158.
Figure 3-26. Installing and Removing an SD Card (PowerEdge M905 and M805)
1 SD card 2 SD card connector
2 1